Stevens Appliance Truck Company
Manufacturers of the famous ESCORT Appliance Trucks

PO Box 897   •   Augusta, GA 30903-0897
Phone: (706) 798-8535     TOLL FREE 1-888-463-8757    FAX: (706) 798-4511
www.StevensMFG.com       E-Mail:
Info@StevensMFG.com

viagra naturel viagra pour homme cialis effet secondaire cialis ou viagra cialis 20mg pas cher kamagra 100mg pour femme kamagra gel pas cher levitra avis levitra en ligne viagra en ligne viagra grique viagra generique cialis pas cher cialis generique levitra generique levitra pas cher kamagra gel kamagra jelly
How to Use Our "EASY ORDER" System for General Purpose Handtrucks
Kamagra Cialis Original Contrareembolso Cialis Original Cialis Generico Madrid Cialis Generico Propecia Generico Comprar Propecia Generico Barato Viagra Cialis Générique Cialis Generic
1. The first alpha character designates the frame type.
  A = Single Centered Pin Handle, 50" ht.
  B = Dual Plow Handles, 50" ht.
  CTE = Crawler Tread Equipped, Dual Plow Handles, 50" ht.
  D = Continuous Frame, 47" ht.
  E = Loop Handle, 50" ht.
  F = Dual Pin Handles, 50" ht.
  P = Loop Handle, 54" ht.
 
2. The letters "NE" should follow the first alpha character if the 24" Fold Down
  Nose Extension is desired.   This model can be Priced by adding the applicable cost of Replacement Part F24NE to the frame/wheel combination that you desire.
 
3. The next three numbers tell the capacity.
  Example: E-500 = Loop Handle, 50" ht. 500 lb. capacity.)
 
4. The last alphanumeric characters designate the replacement part number of the wheel
  being replaced on this model.
  Example: E-500-W15 = Loop Handle, 50" ht. 500 lb. capacity, 8" x 1 5/8" Aluminium Mold On Rubber Wheels.
 
5. An "* " indicates that the model can be shipped by UPS.
 
  Model Price Wt. Model Price Wt.  
 *A-500-W26$179.0039 lbs.*A-500-W27$185.0039 lbs. 
 *A-650-W19$157.0039 lbs.*A-650-W25$168.0044 lbs. 
 *B-500-W19$157.0037 lbs.*B-500-W25$168.0042 lbs. 
 *B-650-W26$179.0037 lbs.*CTE-500-W19$202.0042 lbs. 
 *D-500-W19$157.0034 lbs.*D-500-W25$168.0039 lbs. 
 *D-650-W26$179.0034 lbs.*E-500-W19$157.0040 lbs. 
 *E-500-W25$168.0045 lbs.*E-650-W26$179.0040 lbs. 
 *F-500-W19$157.0040 lbs.*F-500-W25$168.0045 lbs. 
 *F-650-W26$179.0040 lbs.*P-400-W19$157.0037 lbs. 
 *P-400-W25$168.0042 lbs.*P-400-W26$179.0037 lbs. 

 
 
Magnesium Models
 Model / Part No.DescriptionDimensions Wt.PriceUnit
*MR   40 lbs.$440.00ea.
*MRT   41 lbs.$455.00ea.
*MRT-2R   45 lbs.$574.00ea.
*MRT-66   48 lbs.$524.00ea.
*MRT-M-60   57 lbs.$618.00ea.
*MRT-M-66   58 lbs.$628.00ea.
*MRT-MM   38 lbs.$435.00ea.
 
Steel Models
 Model / Part No.DescriptionDimensions Wt.PriceUnit
*ES2ST   40 lbs.$284.00ea.
*ESR   $313.00
*ESRT   42 lbs.$342.00ea.
*S2ST   49 lbs.$330.00ea.
*S2ST-8   46 lbs.$377.00ea.
*SR   51 lbs.$360.00ea.
*SR-8   45 lbs.$382.00ea.
*SRT   51 lbs.$388.00ea.
*SRT-2R   55 lbs.$492.00ea.
*SRT-8   48 lbs.$410.00ea.
*ULTRA DUTY FREIGHTER   82 lbs.$520.00ea.
 
Heavy Duty Steel Trucks
 Model / Part No.DescriptionDimensions Wt.PriceUnit
*SRT-8HD   57 lbs.$500.00
*SRT-HD   52 lbs.$416.00
SRTM 66 HD   81 lbs.$650.00each
SRTM 72 HD   84 lbs.$662.00each
*SRT-M-60   72 lbs.$580.00ea.
SRT-M-60 HD   79 lbs.$640.00EA
*SRT-M-66   74 lbs.$593.00ea.
SRT-M-72   77 lbs.$604.00ea.
V-72-M   91 lbs.$725.00ea.
VENDER72   116 lbs.$793.00ea.
VENDER78   119 lbs.$804.00ea.
VENDER84   122 lbs.$815.00ea.
 
Drum Beater Handling Equipment
 Model / Part No.DescriptionDimensions Wt.PriceUnit
*DB-W24 DRUM BEATERw/phenolic wheel   48 lbs.$372.00ea.
*DB-W24B DRUM BEATERwith thermoplastic wheels (W24B)   48 lbs.$399.00ea.
 
Specialized Task Trucks
 Model / Part No.DescriptionDimensions Wt.PriceUnit
*JTG   46 lbs.$350.00ea.
 
Specialized Attachments
 Model / Part No.DescriptionDimensions Wt.PriceUnit
*BS TV-26   22 lbs$85.00Ea
*BWA-M (AIR TIRES)   15 lbs$155.00Ea
*BWA-M (FLAT FREE TIRES)   15 lbs$148.00Ea
*BWA-S (AIR TIRES)   14 lbs$155.00Ea
*BWA-S (FLAT FREE TIRES)   14 lbs$148.00Ea.
 
Parts And Accessories
 
Crawler Tread
 Model / Part No.DescriptionDimensions Wt.PriceUnit
CT-1Complete Stevens Aluminum Crawler Tread-1/2" hole  $36.00ea
CT-2Complete Stevens Aluminum Crawler Tread-3/8" hole  $35.00ea
CT-3V Belt - Aluminum Crawler Tread  $8.00ea
CT-4Crawler Side Plate-Bossed 3/8" Holes  $12.00ea
CT-4ACrawler Side Plate-Plain 3/8" Holes  $12.00ea
CT-4BCrawler Side Plate-Plain 1/2" Holes (prior to 10/91)  $14.00ea
CT-5Plastic Roller Bearings (Set of 44)  $13.00ea
CT-6Complete Clamor Plastic Stair Climber  $20.00ea
 
Padding
 Model / Part No.DescriptionDimensions Wt.PriceUnit
P-1Rubber & Felt Set (1 1/4" x 53")  $35.40ea
P-2Rubber & Felt Set (1 3/4" x 54")  $35.40ea
P-2ARubber & Felt Set (1 3/4" x 58")  $35.40ea
P-2BRubber & Felt Set (1 3/4" x 64")  $35.40ea
P-3Rubber & Felt Set (1 3/4" x 53 1/2")  $32.40ea
P-3ARubber & Felt Set (1 3/4" x 60")  $33.40ea
P-3BRubber & Felt Set (1 3/4" x 60")  $35.60ea
P-3CRubber & Felt Set (1 3/4" x 42")  $29.20ea
P-4Rubber & Felt Set (1 3/4" x 64")  $33.40ea
P-4ARubber & Felt Set (1 3/4" x 70")  $35.60ea
P-4BRubber & Felt Set (1 3/4" x 75")  $36.60ea
P-6Glue (2 oz jar) 2 oz jar  $9.00ea
P-8Felt Set Only w/glue  $20.80ea
P-8AFelt Set Only w/glue  $15.80ea
P-8BFelt Set Only w/glue  $15.80ea.
P-8CFelt Set Only w/glue  $15.80ea
P-8DFelt Set Only w/glue  $20.80ea
P-8EFelt Set Only w/glue  $15.80ea
P-8FFelt Set Only w/glue  $16.80ea
P-9Footplate Pad - 4" x 24" w/glue  $9.40ea
P-9AFootplate Pad - 4" x 30" w/glue  $12.60ea
P-9BFoot plate Pad - 4" x 26" w/glue  $12.00ea
P-9CFootplate Pad - 5" x 24" w/glue  $12.60ea
P-10Crossmember Felt (1 1/4" x 14 3/8") w/glue  $13.60pkg. of 3
P-10ACrossmember Felt (1 1/4" x 15 7/8") w/glue  $13.60pkg. of 3
P-10BCrossmember Felt (1 1/4" x 17 3/16") w/glue  $13.60pkg. of 3
P-10CCrossmember Felt (1 1/4" x 15 7/8") w/glue  $14.60pkg. of 4
P-10DCrossmember Felt (1 1/2" x 13 3/4") w/glue  $13.60pkg. of 3
P-11Rubber Strip (1 1/4" x 53")  $11.60ea
P-12Rubber Strip (1 3/4" x 53 1/2")  $11.60ea
P-13Rubber Strip (1 3/4" x 58")  $13.60ea
P-14Rubber Strip (1 3/4" x 64")  $13.60ea
P-15Rubber Strip (1 3/4" x 60")  $13.60ea
P-16Rubber Strip (1 3/4" x 42")  $9.40ea
P-17Rubber Strip (1 1/4" x 56")  $13.60ea
P-18Rubber Strip (1 3/4" x 70")  $15.80ea
P-19Rubber Strip (1 3/4" x 75")  $16.80ea
P-20Rubber Strip (1 3/4" x 46")  $11.60ea
P-21SnapLok Vinyl (3/4" x 53")  $14.60ea
P-22SnapLok Vinyl (3/4  $16.00ea
P-23SnapLok Vinyl (1" X 51")  $17.80ea
P-24SnapLok Vinyl (1" X 54")  $16.80ea
P-25SnapLok Vinyl (1" X 55")  $17.80ea
P-26SnapLok Vinyl (1" X 57")  $17.80ea
P-27SnapLok Vinyl (1" X 63")  $18.80ea
P-28SnapLok Vinyl (3/4" X 53") & Felt Set  $33.40ea
P-29SnapLok Vinyl (1" X 51") & Felt Set  $36.60ea
P-30SnapLok Vinyl (1" X 57") & Felt Set  $38.60ea
P-31SnapLok Vinyl (1" X 63") & Felt Set  $40.80ea
 
Straps
 Model / Part No.DescriptionDimensions Wt.PriceUnit
S-114' One Piece Strap w/Claw Buckle  $27.40ea
S-1A10' One Piece Strap w/Claw Buckle  $25.80ea
S-2Complete (14 1/2' ) Two Piece Strap w/Roller Buckle  $34.00ea
S-2A4 1/4' Short Strap Only w/Roller Buckle  $12.00ea
S-2B(14 1/2' ) Long Strap Only w/Metal Tip  $24.00ea
S-3Complete (14' ) Two Piece Strap w/Hook & Loop  $38.40ea
S-4Complete (14' ) Two Piece Strap for Offset Ratchet  $38.40ea
S-5Complete (14 1/2' ) One Piece Strap w/Metal Tip  $21.00ea
S-6Hook & Loop Buckle Set Only  $6.00set
S-92" Webbing, per yard  $4.60yd
S-10Anchor Clip w/Hwd  $5.00pr.
S-11Strap extension-6' w/Hook and Loop  $20.40ea.
S-12Strap extension-4' w/Hook and Loop  $18.00ea.
 
Miscellaneous -Grips, Springs, Axles, Cranks, etc.
 Model / Part No.DescriptionDimensions Wt.PriceUnit
M-1Crank Tightener (5/8 5/8" Rod  $25.00ea.
M-1AComplete Crank Tightener w/Grip (1/2" Rod) 1/2" Rod  $20.00ea.
M-3Complete Crank Tightener w/Grip (1/2" Rod)HLT 1/2" Rod  $25.00ea.
M-4Axle (5/8" X 4") w/Cap Washers  $5.80ea.
M-4AAxle (5/8" X 16 3/4")  $9.60ea.
M-4BAxle (5/8" X 16")  $9.60ea.
M-4CAxle (5/8" X 19 1/2")  $10.60ea.
M-4DAxle (5/8" X 21")  $10.60ea.
M-4EAxle (5/8" X 21 5/8")  $10.60ea.
M-4FAxle (5/8" x 21 9/16")  $10.60ea.
M-4GAxle (5/8" X 23 9/16")  $10.60ea.
M-5Axle (3/4" X 24")  $17.40ea.
M-6Footplate (5" X 24" X 9 gauge)  $28.00ea.
M-7Footplate (5" X 30" X 9 gauge)  $34.00ea.
M-8ASpacer Tube (.840" X 10 3/4")  $7.00ea.
M-8BSpacer Tube (.840" X 11 1/2")  $7.00ea.
M-9Grip (1/2" X 3 1/2")  $6.60ea.
M-10Grip (1/2" X 4")  $7.80pr.
M-11Grip (1" X 4 5/8")  $6.00ea.
M-12Grip (1 1/4" X 4 3/4")  $6.50ea.
M-13Spring-Vender Series (1/2" X 3 1/2" body)  $7.00ea.
M-14Spring - Barrel Truck (1 1/16" X 3 5/8" body)  $8.00ea.
M-15Spring Kit (Spring & Wing Nut)  $7.00kit
M-16Spring - Swing Release (1/2" X 3 7/8" body)  $6.00ea.
M-17Spring - V-72-M (3/4" X 1 15/16" body)  $6.00ea.
 
Ratchets
 Model / Part No.DescriptionDimensions Wt.PriceUnit
R-1(M)Complete 17" Recoil Ratchet Assembly w/o Dog  $55.00ea.
R-1(S)Complete 17" Recoil Ratchet Assembly w/o Dog  $55.00ea.
R-1A(N)Complete 17 1/4" Recoil Ratchet Assembly w/o Dog  $55.00ea.
R-1AComplete 17 3/4" Recoil Ratchet Assembly w/o Dog  $55.00ea.
R-1B Complete 20 1/4" Recoil Ratchet Assembly w/o Dog  $58.00ea.
R-1CComplete 21 5/8" Recoil Ratchet Assembly w/o dog  $58.00ea.
R-1DComplete 22 1/4" Recoil Ratchet Assembly w/o Dog  $58.00ea.
R-2(M)Complete 17" Ratchet Assembly w/o Dog  $46.00ea.
R-2(S)Complete 17 " Ratchet Assembly w/o Dog  $46.00ea.
R-3(M) Handle, Plate and Shaft Assembly  $42.00ea.
R-3(S)Handle, Plate & Shaft Assembly 17"  $42.00ea.
R-3A(N) Handle, Plate and Shaft Assembly 17 1/4"  $42.00ea.
R-3AHandle, Plate & Shaft Assembly 17 3/4"  $42.00ea.
R-3BHandle, Plate & Shaft Assembly 20 1/4"  $45.00ea.
R-3CHandle, Plate & Shaft Assembly 21 5/8"  $45.00ea.
R-3DHandle, Plate & Shaft Assembly 22 1/4"  $45.00ea.
R-4Holding Dog Assembly w/Hwd. Models after 03/01  $15.00ea.
R-4AHolding Dog Assembly w/Hwd. Models before 03/01  $15.00ea.
R-5Recoil Spring  $10.00ea.
R-6Handle Return Spring  $6.00ea.
R-7Alum Collar 3/4" w/Set Screw  $5.00ea.
R-8Spacer 3/4"  $5.00ea.
R-9Recoil Spring Housing Tube  $8.50ea.
R-10Spring Housing Cap  $4.40ea.
 
Frame Parts
 Model / Part No.DescriptionDimensions Wt.PriceUnit
F-1Spacer Bar w/Bolt  $8.00ea.
F-2Top Aluminum Cross Member  $25.00ea.
F-3Cross Member w/Dog  $37.00ea.
F-5Magnesium Side Rail w/Handle (Right side from behind truck)  $85.00ea.
F-5AMagnesium Side Rail w/Handle (Left side from behind truck)  $85.00ea.
F-6Magnesium Side Rail w/Handle (Right Side from behind Truck)  $92.00ea.
F-6AMagnesium Side Rail w/Handle (Left Side from behind Truck)  $92.00ea.
F-7Magnesium Side Rail w/Handle (Right Side from behind Truck)  $78.00ea.
F-7AMagnesium Side Rail w/Handle (Left Side from behind Truck)  $78.00ea.
F-8Magnesium Side Rail w/Handle (Right Side from behind truck)  $90.00ea.
F-8AMagnesium Side Rail w/Handle (Left Side from behind truck)  $90.00ea.
F-9Top Handle w/Hardware  $10.00ea.
F-10Side Handle w/Hardware  $8.00ea.
F-11Swing Release Rod  $7.00ea.
F-11ASwing Release Rod  $7.00ea.
F-12Swing, Vender Series  $110.00ea.
F24NEFold Down Nose Extension 24" for 500 Series  $37.00ea.
 
Wheels
 Model / Part No.DescriptionDimensions Wt.PriceUnit
W-4Phenolic Wheel 4" x 1 1/2" x 5/8", Roller Bearing, 400 # cap  .75 lbs.$10.50ea.
W-9APhenolic Wheel 5" x 2" x 5/8", Roller Bearing, 700 # cap  1.5 lbs.$14.00ea.
W-12Thermoplastic Tread/Polyolefin Core 6"x 2" x 5/8", 400# cap  1.75 lbs.$17.00ea.
W-18Thermoplactic Tread/Polyolefin Core 8" x 2" x 3/4", 500# cap., Replaces W-16 on Models after 9/97  2.5 lbs.$27.80ea.
W-19Solid Rubber Tire, Ball Bearing 8" x 2 1/2" x 5/8", 500 # cap  3.5 lbs.$16.50ea.
W-24Phenolic Wheel, 10" x 2 1/2" x 3/4", Roller Bearing, 2500 # cap  7 lbs.$34.00ea.
W-24BThermoplastic Tread/Polyolefin Core, 10" x 2 1/2" x 3/4", 1000# cap  6.25 lbs.$61.60ea.
W-24CThermoplastic Tread/Polyolefin Core, 10" x 2 1/2" x 1", 1000 # cap  6 lbs.$59.00ea.
W-25Solid Rubber/Polyolefin Core,10" x 2 3/4" x 5/8", Ball Bearing, 550 # cap  6 lbs.$27.80ea.
W-26 Flat Free,10"x 3 1/2"x 5/8", Welded Hub ,Ball Bearing, 300 # cap  3.5 lbs.$30.00ea.
W-27Air Tire, 10" x 4.1" x 5/8", 4 Ply, Bolt Hub,Ball Bearing, 500# cap  4 lbs$33.40ea
C-2Swivel Caster, Thermoplastic tread/Polyolefin Core 3 1/2" x 1 1/4"Flat 250 # cap  2 lbs.$32.00pr.